 |
Journal Papers |
|
|
Book Chapter |
|
|
Book Review |
|
|
Conference Papers |
| Journal Papers | |
| 1. |
Fong K.F., Loh A.P. and Tan W.W., "A Frequency Domain Approach for Fault Detection", Accepted for publication in International Journal of Control. |
| 2. |
Shao L.C., Palaniapan M., Tan W.W., Khine L., "Nonlinearity in micromechanical free-free beam resonators: modeling and experimental verification", Accepted for publication in Journal of Micromechanics and Microengineering. |
| 3. |
Tan W.W., Li F.Y.R., Loh A.P. and Ho W.K., (2007), "RTD response time estimation in the presence of temperature variations and its application to semiconductor manufacturing", IEEE Transactions on Instrumentation and Measurement, vol. 57, no. 2, pp. 406-412. |
| 4. |
Shao L.C., Palaniapan M., Khine L. and Tan W.W., (2007), "Micromechanical resonators with sub-micron capacitive gaps in a 2μm process", Electronics Letters, vol. 43, no. 25, pp. 1427- 1428. |
| 5. |
Tan W.W., (2007) "A modified least-mean-square algorithm for training neurofuzzy controllers on-line", ISA Transactions, vol. 46, no. 2, pp. 181-188. |
| 6. |
Ho W.K, Yap C., Tay A., Chen W., Zhou Y., Tan W.W. and Chen M., (2007), “Temperature Cont Temperature Control and In-Situ Fault Detection of Wafer Warpage”, IEEE Transactions on Semiconductor Manufacturing, vol. 20, no. 1, pp. 1-4. |
| 7. | Tan K. C., Sathikannan R., Tan W.W. and Loh A. P., (2007), "Evolutionary design and implementation of a hard disk drive servo control system", Soft Computing, vol. 11, no. 2, pp. 131-139. |
| 8. | Wu D.R. and Tan W.W., (2006), "A Simplified Type-2 Fuzzy Controller for Real-time Control", ISA Transactions, vol. 45, no. 4, pp. 503-516. |
| 9. | Wu D.R. and Tan W.W., (2006), "Genetic learning and performance evaluation of type-2 fuzzy logic controllers", Engineering Applications of Artificial Intelligence, vol. 19, no. 8, pp. 829-841. |
| 10. | Tan W.W., Tang J.C., Loh A.P. and Tay A., (2006), "In-situ Measurement of Wafer Temperature Using Two Sensors with Different Dynamical Properties", Measurement Science & Technology, vol. 17, no. 11, pp. 2957-2963. |
| 11. | Tan W.W. and Huo H., (2005), “An on-line neurofuzzy approach for detecting faults in induction motors”, IEEE Transactions on Industrial Electronics, vol. 52, no. 5, pp. 1420-1427. |
| 12. | Tan W.W., Lu F., Loh A.P. and Tan K.C., (2005), “Modelling and control of a pilot pH plant using genetic algorithm”, Engineering Applications of Artificial Intelligence, vol. 18, no. 4, pp. 485-494. |
| 13. | Tay E.B.A, Ho W.K., Loh A.P., Lim K.-W., Tan W.W., Schaper C.D., (2004), “Integrated bake/chill module with in-situ temperature measurement for photoresist processing”, IEEE Transactions on Semiconductor, vol. 17, no. 2, pp. 231- 242. |
| 14. | Loh A.P., Cai X.W. and Tan W.W., (2004), “Auto-tuning of phase lead/lag Compensators”, Automatica, vol. 40, no. 3, pp. 423-429. |
| 15. | Tan W.W., Ge P., Tay E.H. and Loh A.P., (2003), “Development of a 3-plates capacitive pressure sensor”, International Journal of Computational Engineering Science, vol. 4, no. 3, pp. 613-616. |
| 16. | Tan W.W. and Li F.Y.R., (2003) “An in-situ temperature measurement system for DUV lithography”, IEEE Transactions on Instrumentation and Measurement, vol. 52, no. 4, pp. 1136-1142. |
| 17. | Tan W.W. and Dexter A.L., (2000), “A self-learning neurofuzzy controller for embedded applications”, Automatica, vol. 36, no. 8, pp. 1189-1198. |
| 18. | Tan W.W. and Dexter A.L., (1999), “Self-learning neurofuzzy control of a liquid helium cryostat”, Control Engineering Practice, vol. 7, no. 10, pp. 1209-1220. |
| Book Chapter | |
| 1. | Tan, W.W. and Wu, D.R., (2007) "Design of Type-Reduction Strategies for Type-2 Fuzzy Logic Systems using Genetic Algorithms", Advances in Evolutionary Computing for System Design, L.C. Jain, V. Palade and D. Srinivasan (Eds.), Springer, pp. 169-188. |
| Book Review | |
| 1. |
Tan W.W. and Chua T.W., (2007), "Review of Uncertain Rule-Based Fuzzy Logic Systems : Introduction and New Directions", IEEE Computational Intelligence Magazine, vol. 2, no. 1, pp. 72-73. |
| Conference Papers | |
| 1. | Chua T.W., Tan W.W., (2007), "GA Optimisation of Non-Singleton Fuzzy Logic System for ECG Classification", In Proceedings of the IEEE Congress of Evolutionary Computation, Singapore, pp. 1677-1684. |
| 2. | Tan W.W., Foo C.L. and Chua T.W., (2007), “Type-2 Fuzzy System for ECG Arrhythmic Classification”, In Proceedings of the IEEE International Conference on Fuzzy Systems, London UK, pp. 859-864. |
| 3. | Tan W.W. and Kamal D.H, (2006), “On-line learning rules for Type-2 fuzzy controller”, In Proceedings of World Congress on Computational Intelligence 2006, Vancouver Canada, pp. 2530-2538. |
| 4. | Srinivasan D., Sanyal S. and Tan W.W., (2006), "Hybrid Neuro-Fuzzy Technique for Automated Traffic Incident Detection" In Proceedings of World Congress on Computational Intelligence 2006, Vancouver Canada, pp. 1692-1698. |
| 5. | Lai J.W. and Tan W.W., (2006), “A Type-2 PI Controller with Variable Type-Reduced Output Set”, In Proceedings of NAFIPS’06, Montréal Canada, TAM3-4. |
| 6. | Shao L.C., Moorthi P. and Tan W.W., (2006), “A continuous-time capacitance to voltage converter for micro-capacitive pressure sensors”, Journal of Physics : Conference Series, vol. 34, pp. 1014-1019. |
| 7. | Lai J.W. and Tan W.W., (2005), “Framework of Type-2 Fuzzy PI Controller”, In Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems 2005, Singapore, NFS3-2. |
| 8. | Shao L.C., Moorthi P. and Tan W.W., (2005), “A Low Power CMOS Peak Detector”, In Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems 2005, Singapore, SF-4. |
| 9. | Tan W.W. and Lai J.W., (2005), "Non-singleton type-1 fuzzy controller for noise rejection", In Proceedings of the IFSA World Congress, Beijing China, vol. 2, pp. 719-724. |
| 10. | Wu D.R. and Tan W.W., (2005), "Type-2 FLS Modeling Capability Analysis", In Proceedings of the IEEE International Conference on Fuzzy Systems, Reno Nevada USA, pp. 242-247. |
| 11. | Wu D.R. and Tan W.W., (2005), "Computationally Efficient Type-Reduction Strategies for a Type-2 Fuzzy Logic Controller", In Proceedings of the IEEE International Conference on Fuzzy Systems, Reno Nevada USA, pp. 353-358. |
| 12. | Ge P., Tan W.W., Tay E.H. and Loh A.P., (2005) "Theoretical model of a three plates capacitive pressure sensor", In Proceedings of the IEEE International Instrumentation and Measurement Technology Conference 2005, Ottawa Canada, pp. 214-219. |
| 13. | Wu D.R. and Tan W.W., (2004), “A Simplified Architecture for Type-2 FLSs and Its Application to Nonlinear Control”, In Proceedings of the IEEE Conference on Cybernetics and Intelligent Systems, Singapore, pp. 485-490. |
| 14. | Tan W.W. and Lai J.W., (2004), “Development of a type-2 fuzzy proportional controller”, In Proceedings of the IEEE International Conference on Fuzzy Systems, Budapest Hungary, Paper #1138. |
| 15. | Wu D.R. and Tan W.W., (2004), “A type-2 fuzzy logic controller for the liquid level level process”, In Proceedings of the IEEE International Conference on Fuzzy Systems, Budapest Hungary, Paper #1299. |
| 16. | Wang L., Chow S. L., Loh A. P., Gong Z., Tan W.W., Tay A.E.B. and Ho W.K. (2004), "A Novel Wafer Baking Systems Using Hot Air Streams". In Proceedings of the SPIE International Symposium on Microlithography, Santa Clara California USA. |
| 17. | Tan W.W. and Pall S.N., (2003), “Performance Study of Type-2 Fuzzy Controllers” In Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems 2003, Singapore, PS01-4-07. |
| 18. | Tan W.W. and Lo C.H., (2003), “On utilising structural information for adaptive control of a pH neutralisation process”, In Proceedings of the European Control Conference, Cambridge UK. |
| 19. | Tay A.E.B, Ho W.K., Lim K.W., Loh A.P. and Tan W.W., (2003), “Control and Signal Processing for the Microlithography Process”, To be presented at AIChE Annual Meeting 2003, San Francisco USA. |
| 20. | Tan W.W. and Zhang J. (2002), “An in-situ temperature measurement system for DUV lithography”, In Proceedings of the IEEE Instrumentation and Measurement Technology Conference 2002, Anchorage Alaska USA, vol. 1, pp. 843-848. |
| 21. | Tan W.W. and Li F.Y.R. (2002), “A temperature sensor software compensation algorithm for DUV lithography”, In Proceedings of the 4th Asian Control Conference, Singapore, pp. 1654-1659. |
| 22. | Tan W.W. and Zheng J. (2002), “A neural network approach for sensor fault detection and accommodation”, In Proceedings of the 4th Asian Control Conference, Singapore, pp. 1849-1854. |
| 23. | Loh A.P., Fu J. and Tan W.W., (2002) “Forced Oscillations in Single Loop Systems”, In Proceedings of the 4th Asian Control Conference, Singapore, pp. 1296-1301. |
| 24. | TAY, A.E.B., Ho W.K., Lim K.W., Loh A.P. and Tan W.W. (2002) “Control and Signal Processing for Photoresist Processing in Microlithography”, To be presented at IECON 2002, Sevilla Spain. |
| 25. | Lo C.H. and Tan W.W. (2001), “On-line training of neurofuzzy controllers to control second order plants”, In Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems 2001, Singapore, pp. 94-99. |
| 26. | Tan W.W. (2001), “Control of a non-linear process using a neurofuzzy model-based strategy” In Proceedings of the First International Conference on Computational Intelligence, Robotics and Autonomous Systems, Singapore, pp. 70-75. |
| 27. | Tan W.W. and Lo C.H. (2001), “Development of Feedback Error Learning Strategies for Training Neurofuzzy Controllers On-line”, In Proceedings of IEEE International Conference on Fuzzy Systems, Melbourne Australia, vol. 2, pp. 1016-1021. |
| 28. | Loh A.P., Fu J., Tan W.W., (2000), “Controller design for TITO systems with mode 3 oscillations”, In Proceedings of the IEE International Conference on Control 2000, Cambridge, UK. |
| 29. | Loh A.P., Cai X.W. and Tan W.W., (2001), “Novel use of relays in identifying frequency response points”, In Proceedings of the American Control Conference, Arlington Virginia USA, vol. 4, pp. 3288-3293. |
| 30. | Tan W.W. and Huo H., (2001), “An on-line neurofuzzy approach for detecting faults in induction motors”, In Proceedings of IEEE International Electric Machines and Drives Conference, Cambridge Massachusetts USA, pp. 878-883. |
| 31. | Tay A.E.B., Lim K.W., Loh A.P., Tan W.W., Ho W.K., Huang A. and Fu J. (2001), “Spatially-programmable thermal processing module for 300mm wafers”, In Proceedings of SPIE International Symposium on Microelectronic and MEMS Technology, Edinburgh Scotland UK, pp. 56-63. |
| 32. | Tan W.W., Lu F., Loh A.P. (2001), “An application of genetic algorithm for designing a Wiener-model controller to regulate the pH value in a pilot plant”, In Proceedings of the Congress of Evolutionary Computation, Seoul Korea, vol. 2, pp. 1055-1061. |
| 33. | Tan. W.W., Zhang J. and Loh A.P., (2001), “Towards an intelligent in-line temperature measurement system for semiconductor manufacturing”, In Proceedings of the IEEE Instrumentation and Measurement Technology Conference 2001, Budapest Hungary, vol. 1, pp. 374-379. |
| 34. | Khor E.F., Lu F., Tan K.C., Lee T.H. and Tan W.W., (2000), “Design and real-time implementation of a multivariable gyro-mirror line-of-sight stabilization platform”, In Proceedings of the SCI2000/ISAS2000 Conference, Orlando, Florida, USA. |
| 35. | Tan K.C., Sathikannan R., Tan W.W., Loh A.P. and Mamun A. Al., (2000), “Evolutionary design and real-time implementation of a hard disk drive servo control system”, In Proceedings of the IEE International Conference on Control 2000, Cambridge, UK, Session 8C. |
| 36. | Tan W.W., Lu F., Tan K.C. and Loh A.P., (2000), “Control of a pH process using genetic algorithm”, In Proceedings of the 3rd Asian Control Conference, Shanghai P.R. China, pp. 766-771. |
| 37. | Tan. W.W. and Thio C.K., (2000), “Neurofuzzy control of a pH process”, In Proceedings of the 6th International Conference on Control, Automation, Robotics and Vision, Singapore, Session FM7. |
| 38. | Loh A.P., Cai X. and Tan W.W., (2000), “Auto-tuning of phase lead compensator using relay feedback”, In Proceedings of the 3rd Asian Control Conference, Shanghai P.R. China, pp. 733-738. |
| 39. | Lim K.W., Luo J., Gu J., Poh Y.P., Tan W.W. and Loh A.P. (1999), “Integrated in-line temperature measurement system for silicon wafer semiconductor manufacturing”, In Proceedings of the 25th Annual Conference of the IEEE Industrial Electronics Society, San Jose USA, Vol. 1, pp. 6-10. |
| 40. | Loh A.P., Huang A., Tan W.W., Lim K.W. and Ho W.K., (1999), “Control of an integrated Bake/Chill system”, In Proceedings of the IEEE Conference on Decision and Control, Phoenix USA, Vol. 4, pp.4198-4203. |
| 41. | Huang A., Loh A.P., Tan W.W., Lim K.W. and Ho W.K., (1999), “Modelling of a wafer baking process using ABAQUS”, In Proceedings of the High Performance Computing Conference ’99, Singapore, pp. 114-122. |
| 42. | Tan W.W. and Dexter A.L., (1996), “On-line adaptive fuzzy control of a cryostat”, In IEE Colloquium : Fuzzy Logic Controllers in Practice, London, UK, pp. 3/1-3/5. |
| 43. | Tan W.W. and Dexter A.L., (1996), “Design and practical application of a feed-forward fuzzy control algorithm”, In Proceedings of the 4th European Congress on Intelligent Techniques and Soft Computing, Aachen, Germany, vol. 2, pp. 995-999. |
| 44. | Loh A.P., Tan W.W. and Vasnani V.U., (1994), “Relay feedback of multivariable systems and its use for tuning of multi-loop PI controllers”, In Proceedings of IEE International Conference on Control '94, Warwick, UK, vol. 2, pp. 1049-1054. |
Back to Top| Click on images for details |
|
|
